|The main purpose of the Chip is to
monitor ink levels and to provide an on-screen message telling you that the
cartridge is running low or is empty. Your Canon Chip Resetter allows you to
restore this function and once you have refilled your cartridge you can resume
full use just as it did when it was new.
1. - Slide the cartridge, chip facing downward, into the
2. - Push the cartridge down to ensure that the Chip
touches the contact plate.
3. - A short flash signals the contact has been made,
followed by a continuous LED-light which tells you that the programming has been
successfully completed. The cartridge can now be removed.
4. - To reprogram the larger black cartridge just take
the guide adapter off the slide.
Note: Canon Chip Resetters come in Red or Blue but
function the same.