BROTHER LC51 Refill Instructions
1) Cut label at joint between top and bottom
the cartridge case.
open the cartridge casing (shell).
sharp filling needle onto the syringe and fill the
syringe with ink.
4) Pierce the top part of the cartridge with the needle and S-l-o-w-l-y
inject 15cc of ink into the
5) Put a
piece of aluminum tape over the filling hole.
9) Place the
casing (shell) back together and use a piece of tape to hold the two sides of the casing
Note: Do not bump or press the "pressure release button".
10) Replace the cartridge(s) and run 1 - 3 cleaning cycles
as per printer instructions.